Shanwan Q36 Manual

Digitized by ChatGPT in 2025 🙂

Q36 Functional Diagram

• D-pad Button
• X/Y/B/A Button
• Reconnection/Home Button
• View Button
• +/- Menu Button
• L/L2 Button
• R/R2 Button
• Reset Hole
• Mode Switch
• Type-C Charging Port
• Pair/Power Button

Android / iOS / Windows

Bluetooth connection

1. Flip the switch to X to enter the X-INPUT mode.
2. First use (Power-on pairing):
   • Press the Pair button to start the pair, and the LED will blink.
   • Turn on your device's Bluetooth search and connect the Bluetooth device "XBOX Wireless Controller"
   • The LED is always blue when reconnection is successful.
3. Use again (Reconnection):
   • Press the (home) button to power on and the LED will blink slowly.
   • The LED is always blue when reconnection is successful.
   • Press the Pair button to power off the device.

HID for Android

Bluetooth connection

1. Flip the switch to D to enter the HID for Android mode.
2. First use (Power-on pairing):
   • Press the Pair button to start the pair, and the LED will blink.
   • Turn on your device's Bluetooth search and connect the Bluetooth device "Q36 for Android"
   • The LED is always red when reconnection is successful.
3. Use again (Reconnection):
   • Press the (home) button to power on and the LED will blink slowly.
   • The LED is always red when reconnection is successful.

ShootingPlus for Android

Bluetooth connection

1. Flip the switch to V to enter the ShootingPlus mode.
2. First use (Power-on pairing):
   • Press the Pair button to start the pair, and the LED will blink.
   • Turn on your device's Bluetooth search and connect the Bluetooth device "ShanWan Q36"
   • The LED is always green when reconnection is successful.
3. Use again (Reconnection):
   • Press the (home) button to power on and the LED will blink slowly.
   • The LED is always green when reconnection is successful.

Controller Charging / Sleep / Wake-up Function

Charging

• When charging, the LED will blink slowly.
• When the battery is full, the LED will keep bright.

Sleep / Wake-up function

• In pairing state, the controller will sleep if it's not paired successfully within 2 minutes.
• Connect back state: The controller will sleep if it is not connected back within 1 minute.
• Bluetooth is connected state: The controller will sleep if the controller is not used within 15 minutes.

Wake-up function

Press the (home) button to connect back when you need to wake-up.

Electrical Parameters

• Working voltage: DC3.7V
• Working current: <30mA
• Sleep current: <5uA
• Charging voltage/current: DC5V/500mA
• Bluetooth transmission distance: ≤ 8m
• Battery capacity: 180mAh
• Standby time: 30 days (fully charged)

Image